Product handling

product

cotton products
It tends to shrink and wrinkle easily.
Also, please note that prolonged exposure to sunlight may cause discoloration.
There may be fine black spots on the fabric,
It is a characteristic of cotton material that leaves cotton residue for a natural texture.
hemp products
There may be woven fushi (thick lines) on the surface, which is a unique feature of hemp.
silk products
Friction may cause fluffing or pilling.
organic cotton products
Organic cotton is cotton grown in fields that do not use pesticides or chemical fertilizers for more than three years.
acrylic knit products
Due to the characteristics of the material, it is prone to discoloration, discoloration, and stains, and pilling may occur due to friction.
Cotton (cut and sew), hemp knit products (fawn, cotton sheeting, single jersey)
Due to the characteristics of the fabric, it may be twisted when washed, so please adjust the shape and dry after washing.
feather products
Due to the characteristics of the product, fluff inside may pop out from the outer material (especially the seams).
Do not remove fluff that has protruded, but put it inside.
Please remove feathers attached to the outer material with adhesive tape.
fur products
Please be careful as the color may transfer due to friction or wetness.
After wearing, please dry in a shaded place with good ventilation and store in a dark place without humidity.
Dark colored items may transfer color due to friction, sweat, or water.
In addition, since natural fur products have individual differences, the color tone may differ, and the fur may come off or break.
Shearling products
Dark colored items may transfer color due to friction, sweat, or water.
fake shearling products
It is a material that is weak against water and oil stains and easily attracts dust and dirt due to static electricity caused by friction.
The inner fur may become loose due to repeated wear, and the texture and appearance may change.
Please note that color transfer may occur due to friction while wearing or when wet with sweat or water.
If it gets wet with water such as rain, wipe it with a dry towel and dry it in the shade.
Please avoid ironing.
color scheme product
Products with dark and light color schemes may cause color transfer.
Avoid sweating or leaving it wet with rain or water.
Products using roving yarn and sliver yarn
Emphasis is placed on soft bulge, and materials made from untwisted threads are used.
It is a very delicate material, and it may cause fluffing, pilling, or snagging due to the rubbing action while wearing.
When wearing or removing the product, be careful not to rub it against belts, bags, accessories, nails, watches, hairpins, etc.
Avoid wearing it every day.
If it becomes a pill, please cut it carefully with small scissors without pulling it.
natural leather products
Dark colored items may transfer color due to friction, sweat, or water.
There may be some color unevenness, scratches, or threads that occur during the production process.
Please handle with care to avoid color transfer.
Synthetic leather products (polyurethane resin coating, polyvinyl chloride resin coating PVC)
The coating may peel off due to contact with hard objects such as bags and belts.
Due to the characteristics of the material, deterioration, stickiness, peeling, discoloration, etc. may occur over time.
bore products
The fluff may fall down and change the texture and appearance.
satin fabric
Scratches may occur due to friction with bags, belts, and other clothing.
Strong force may cause unraveling of the stitching and unevenness of the fibers.
velor, velvet,
corduroy
Color may fade or transfer due to friction.
willow
A fabric with fine warp wrinkles (unevenness in the warp direction).
Please be careful as Yangryu products may shrink if they get wet with rain or water.
Raised products, materials with long piles (disturbed fluff, attached fluff)
Due to the nature of the product, friction and static electricity may cause the hair to become tangled or untidy.
Peach skin product (thread)
Due to its characteristics, dry friction may cause fluff on the surface to fall off and darken the color, and wet friction may cause fluff to become whitish.
Tencel (lyocell) products
Discoloration or whitening may occur due to friction.
Rayon, cupra products
Friction and washing may cause whitening, fluffing, and discoloration.
Animal hair blend (including Peruvian products), soft twist, brushed products
It features a smooth texture, but the fluff on the surface may adhere to other things.
You may also feel the peculiar smell of the materials used.
Harako
Please note that this is a delicate material and is vulnerable to friction.
polyurethane products
Avoid direct sunlight and store in a dark, dry place to avoid deterioration of polyurethane fibers.
basket product
Please note that the color may fade due to friction or wetness.
In addition, please be careful about hooks.
Due to the material, wrinkles, distortion, and color unevenness may occur.
Indian products (general including cotton products)
There are unevenness in color, uneven weaving, and slub, but please enjoy the unique texture as it is a characteristic.
Dark colors may fade.

Thread/fiber

metal fiber
Metal fibers may wrinkle due to friction, but please enjoy it as a characteristic of the material.
Slit yarn (metallic yarn)
Since metal thread is used, avoid contact with hair, silk, and rubber products, and store in a well-ventilated place.
Twisted yarn (strongly twisted yarn, used for suits, etc.)
Due to the characteristics of hard-twisted yarn, it may wrinkle when wet, so please be careful.
nep thread
It is a "cluster of small fibers", and it is a thread in which small grains are irregularly contained.
Please note that due to the characteristics of NEP thread, the thread may rise due to friction.
mall thread
Due to the characteristics of mall thread, the thread may stand out or get caught.
paper yarn
This product uses paper and has undergone special processing.
Please be careful not to wash or get wet as it may cause deformation, shrinkage and color fading.
cut lace,
cut jacquard
Please be careful as the floating thread at the end of the handle may get caught or come off.

processing

embossing
The embossing may be reduced due to scratches and friction during normal use.
oil coating,
paraffin processing
Chalk marks may occur due to friction during normal use, but the texture is unique to oil coating and paraffin processing.
polyurethane coating
Fabrics coated with polyurethane resin may deteriorate, peel off, or become sticky over time.
Calender processing (chinz processing)
“Calendering is a process that gives luster. It is not permanent, and the texture may soften with repeated wear.
Wrinkled products, hemp wrinkled products
Wrinkles are applied, but they are not permanent.
With repeated wear, the processing will gradually disappear.
The wrinkled processing of linen makes it easier for the wrinkled part to appear due to the friction of washing and wearing.
pleating
Pleats are not permanent. Creases may become loose due to wear.
Polyurethane resin processing
Avoid high temperature and humidity, and store on a hanger in a dark place with low humidity.
Please handle with care to avoid wrinkling and peeling.
Bonding products
The bonding process gradually deteriorates and peels off. Avoid storing it while it is still dirty.
Distressed finish
Because each piece is processed one by one, there are differences in color and shape.
Printed products (foaming,
rubber, pigment)
Repeated wear and washing may cause the print to crack or fall off.
foil print
Prints are not permanent and may peel off with repeated wear and washing.
Product washing, product dyeing
There may be slight differences in color, texture, size, color fading or color transfer due to product washing.
indigo dyed products
Color may fade or transfer.
Pigment dyeing, sulfide dyeing products
Pigments and sulfide dye products may transfer color due to friction.
vegetable dye products
Dark-colored products that are dyed with plants may cause color transfer or fading due to friction.
uneven dyeing
This product has an uneven surface due to processing. Please enjoy the unique texture.

Special specification

Products that combine different materials
Products that combine different materials may change shape (twist, sag, tangle, etc.) by repeated wearing and washing.
raw cut product
Due to the nature of the design, there are parts that are cut off, so it may fray with repeated wear and washing.
use bias
Sleeves and length may stretch.
products with skewed design
“The design is slanted (twisted). The twisted design may become stronger with repeated wear.
needle punch
Repeated wear and washing may cause fluffing and pilling.

parts

shell button
Since the button is made from natural shellfish, there may be slight differences in color and thickness.
Reverse zipper (double zipper)
When wearing, insert the pin firmly to the base and pull up the upper slider.

accessories

plated products
It discolors easily and requires careful maintenance.
People with allergies or poor physical condition may get a rash.
silver
It may tarnish in air and lose its luster.
Gold (18K, 14K, 10K, etc.)
Oxidation and sulfuration may cause discoloration.
cotton pearl
Due to the characteristics of the manufacturing method, there are cases where the cotton pops out, and there are irregular shapes and irregularities.
necklace bracelet
Please note that pulling strongly or applying excessive force may cause damage.

Contact form